Today I made a step further in the Collapsible Yagi Antenna build. The coax connection module is finished, sans the hot melt glue that will help keep things together. Else the antenna beam would be done today. The thing is that this build must be prototyped and done form the inside out.
On the right is the connections’ module with one of the driven elements placed, and a ring of PCV pipe to simulate the boom.
On the left is a simulation of the way the connection module was assembled. The 3mm bolts pass through the 16mmPVC pipe section. Then through the 20mm pipe section that has room for the nut.
You can also have a look at this pic. Stay tuned!