Month: October 2017

While the next article is cooking….

The Dangers Of Amateur Radio…

Advertisements

HAMsmithing – October 2017

Here are two small projects for the beginning of this month.

12V to 10V Adapter Cable for Baofeng UV-5R Charging

A common mistake made is using a cigarette lighter power cord for powering the Baofeng UV-5R Charger. Problem is that the charger needs 10V and not the battery 12.8V, much less the 13.8V when a car battery is charged.

My solution was to make an adapter cable with a resistor inline to drop the voltage to a bit more than the 10V spec’ed.

web-IGP4067

Continue reading “HAMsmithing – October 2017”

A Small, Pocketable Antenna Kit for Handheld Radios

I call it the Giveaway Antenna Kit. Because it has the capability to be adapted to any handheld radio, that is, the antenna connector style of any handheld radio. So you can have it in your larger radio kit, and give it away to anyone in need without bothering for compatibility with his radio.

The basic idea stems from this idea by Bret of Survival Comms Youtube Channel . The use of the handheld radio’s own (actually aftermarket improved) antenna on a groundplane kit. In my built, the groundplane (radials’) kit is much simpler and easier to use. You just attach the antenna kit wire to fit your HT.

web-IGP4059

Construction

Continue reading “A Small, Pocketable Antenna Kit for Handheld Radios”

Ενα μικρό Κιτ Εξωτερικής Αντένας για το Φορητό σας Ασύρματο

Οι φορητοί μας ασύρματοι υστερούν στην αποτελεσματικότητα τους για δύο λόγους. Έχουν μέτρια , έως κακή κεραία, και δεύτερον έχουν χαμηλή ισχύ.

Μπορούν όμως να βελτιωθούν προσθέτοντας μια καλύτερη κεραία (κάντε το οπωσδήποτε) και επίσης -αν μένουμε σταθεροί- μια κεραία βάσης.

Η ιδέα μου βασίζεται στην ιδέα του Bret από το Survival Comms. Στην ουσία μετατρέπει την βελτιωμένη κεραία του φορητού ασυρμάτου σε μια groundplane κεραία βάσης, κατασκευάζοντας ένα προσαρμογέα με radials.

web-IGP4059

Η κατασκευή μου προχωρά παραπέρα δημιουργώντας ένα εύκολα κατασκευάσιμο κιτ radials.

Continue reading “Ενα μικρό Κιτ Εξωτερικής Αντένας για το Φορητό σας Ασύρματο”

HAMsmithing – September 2017

Just as September was ending, I spent quite some time on small HAM projects.

1. I received the connectors and cables I ordered, so I sat down making cables for each DIY antenna I have.

2. I used some leftover PVC pipe to add 2 more sections in my collapsible antenna pole. Each section is 130cm (about 1.5 yards long), the wider my car trunk will allow. That makes for about 7 yards total height, just short of what one would need to make a sloping longwire antenna.

Continue reading “HAMsmithing – September 2017”